Chimney Rebuild in Panama City, Florida
Take the damaged stack down to sound brick and build it back.
- Licensed and insured
- Same-day service is available
- Family owned and operated
- Owned and run locally
At a glance
A chimney rebuild in Panama City takes a leaning or crumbling stack down to sound brick and lays it back up. The new section gets matched brick, a cast crown, a cap and new flashing; our Panama City crew marks where sound masonry starts and checks the permit question first.
Save 10% on Work Booked in the 72 Hours After Your Inspection
Book the rebuild within 72 hours of your free inspection and save 10% on the work.
Why Panama City Homeowners Call Us
-
Family owned and operated
The rebuild is planned with you and laid by the family masons themselves.
-
Upfront, honest pricing
You see the scope and price in writing, course by course.
-
Workmanship warranty
The rebuilt section is covered by our workmanship warranty.
When repair turns into rebuild
Most masonry problems can be repaired in place. A rebuild becomes the right answer when the bricks are no longer tied together: the stack moves when pushed, courses have shifted, cracks run through the masonry rather than along a joint, or so many bricks are spalled that replacing them one by one would touch most of the chimney.
A leaning chimney is a safety issue as well as a leak issue. Keep people away from the area below it and call before climbing up.
Partial and full rebuilds
Most rebuilds stop at the roofline or a few courses below it, where the masonry is protected from weather and still sound. A full rebuild to the foundation is rare and usually follows structural movement or major damage. We show you where sound brick starts before agreeing on the scope.
The estimate prices the partial rebuild and any repair option side by side, so the choice stays yours.
Building it back right
The new section is laid with brick matched as closely as possible to the original and mortar suited to it. The top gets a cast crown with slope and overhang, a bond break around the flue and a cap. New flashing ties the rebuilt stack into the roof.
The chimney height has to meet the Florida Building Code rules for clearance above the roof and nearby structures, and we build to that height.
Permits and the flue
Rebuilding a chimney stack is structural work, and Florida Statutes 553.79 expects a building permit for that kind of work. We check the requirement with the local building department and include it in the plan.
While the stack is open, the flue tile at the rebuilt section is replaced or the chimney is relined, depending on the condition of the rest of the flue.
Rebuild Work We Do
- A partial chimney rebuild to rebuild chimney above roofline sections where the top courses failed
- Leaning chimney repair by rebuilding the leaning section
- Full chimney rebuild or chimney reconstruction when the damage runs deep
- One chimney rebuild contractor for the brick, crown, cap and flashing
How Much of the Chimney Needs Rebuilding
Panama City Chimney Emergency?
Our 24/7 emergency line is staffed around the clock, and after the danger passes we work out the repair with you.
Flames, a gas odor or a sounding CO alarm: take everyone out of the house and dial 911. Phone the gas utility only once you are outdoors.
Book Your Free Panama City Inspection
Leave a name and number and we ring back to agree on a visit time.
- Free inspection and written estimate
- Licensed and insured
- Family owned and run
Request Received
Thanks, it is in. A family member rings you soon to book the inspection.
How We Handle Chimney Rebuild
-
Find sound brick
We inspect the stack and mark where the masonry is still solid.
-
Plan and permit
You get a written scope and price, and we handle the permit question.
-
Take down and rebuild
The damaged section comes down and is relaid with new brick and mortar.
-
Crown, cap and flashing
A new crown, cap and flashing finish the top and the roof joint.
Questions Homeowners Ask Us
How long does it take to rebuild a chimney?
A partial rebuild above the roofline often takes a few working days. New masonry also needs curing time before the crown and cap are finished. Weather, permit timing and how far down the damage goes all change the schedule, and the written estimate states the expected days.
How much does it cost to rebuild the top of a chimney?
The number of courses that come down sets most of the price. Stack size, roof pitch and covering, and what the flue needs at that height add to it; a few courses with a new crown is a much smaller job than a stack taken down to the roofline.
What does rebuilding a chimney stack involve?
A stack rebuild starts by removing damaged brick down to sound masonry. Then the stack is relaid with matched brick and mortar and finished with a new crown, cap and flashing. The flue tile or liner at that section is handled at the same time, with the roof protected throughout.
Does a leaning chimney need to be rebuilt?
Usually the leaning section has to come down and be rebuilt. A lean means the bricks no longer hold together or the support below has moved; a crew should find the cause before anything is decided, and people should stay clear of the area below in the meantime.
Why are bricks falling off my chimney?
Bricks fall off a chimney when the mortar holding them has washed out or the brick faces have broken up from water damage. Wind and heat movement finish the job. Loose brick near the top often means the crown or cap has let water in for a long time, and that section may need rebuilding.
Why is my chimney leaning away from the house?
A settling footing is one cause. Failed ties to the house framing, or masonry above the roof that has deteriorated and shifted, are others; the cause decides the repair, so our crew checks the stack, the roof joint and the base before recommending a rebuild of the affected section.
Other Work Worth a Look
Rebuild a Damaged Chimney Safely
Find out how much of the stack needs to come down.